In Brooklyn for Review: GigaFOILv4-INLINE Ethernet Filter

DJM Electronics GigaFOILv4-INLINE Ethernet Filter ($550).

Typical Performance

Shielding Effectiveness: 100dB from 10kHz to 10GHz
Insertion Loss: 100dB from 10kHz to 10GHz
Conducted/Radiated Emissions:

Exceeds MIL-STD-461 CE102
Exceeds MIL-STD-461 RE102
Exceeds FCC Part 15 A, B
Exceeds EN 55022 Class A, B

Safety Standards

UL File Number: E362686
UL 60950-1 and CSA C22.2 No. 60950-1
RoHS 2011/65/EU and RoHS 2015/863
REACH 1907/2006 Article 33
POP 850/2004
EN 55024:2010
EN 55032:2012 + AC:2013
EN 61000-3-2:2014
EN 61000-3-3:2013
FCC 47 CFR Part 15B
ICES-003 Issue 6

Environmental

Operating Temperature: -40ºC – 70ºC (-40ºF – 158ºF)
Humidity: 5% – 90% (non condensing)

Communication and Network Performance

Auto MDI/MDI-X Configuration: Automatically detects and configures the twisted pair port on the converter to the correct MDI or MDI-X configuration.
Auto Negotiation: Automatically configure 10Mbps, 100Mbps or 1000Mbps
Flow Control: Supports 802.3x Flow Control for Full-Duplex mode and Back Pressure for Half-Duplex mode.
Hot Pluggable: Can be plugged in/out without affecting the filter or other links.
Auto Link Restoration: Automatically re-establishes the network link after a link loss.

Communication Standards

IEEE802.3 10Base-T (Ethernet)
IEEE802.3u 100Base-TX (Fast Ethernet)
IEEE802.3ab 1000Base-T/TX (Gigabit Ethernet)

Construction

Filter Housing: 20 ga zinc plated cold rolled steel

Power Requirements

Input: 120VAC 60Hz
Output: +5V / 1000 mA minimum
DC plug type: center positive