In Barn for Review: VinnieRossi CANTA Integrated Amplifier

Take one part Class A 6SN7-based line stage, add a high-current dual mono Class AB MOSFET output stage and a chassis CNC machined from a solid block of aluminum and you have the beginnings of a new chapter in the Vinnie Rossi story.

I first met Vinnie in 2005 and most recently had the great pleasure of reviewing his seductive BRAMA Integrated Amplifier about which I concluded:

Chief among the Brama’s strengths are its graceful way with any music you send its way coupled with just-right richness, full range reach, and a kind of effortless purity that invites the listener in, as deeply as one’s time and attention allows. And Vinnie Rossi wrapped all of that sonic goodness in one of the most attractive, thoughtfully designed packages I’ve had the pleasure to live with. All told, the Vinnie Rossi Brama Integrated Amplifier comes with my highest recommendation. Bravo!

the front panel includes a centered high-resolution LCD display

Fast forward to right now and we’re looking at the new VinnieRossi CANTA Integrated Amplifier, one of four products from the new CANTA series that also  includes the CANTA Preamplifier, CANTA Stereo Amplifier, and CANTA Phono Preamplifier. The CANTA Integrated, as the opening paragraph shares, employs a Class A 6SN7-based line stage paired with a high-current dual mono Class AB MOSFET output stage producing a reported 125 Watts into 8 Ohms and 250 Watts into 4.

A total of four inputs—2x RCA, 2x XLR—are joined by one each RCA and XLR outputs in the event you choose to use the Integrated as a preamp only (why?), a set of speaker binding posts, USB-C for firmware updates, and an IEC inlet.

photo credit: VinnieRossi

As is the case with BRAMA, the CANTA Integrated looks just as good on the inside with those 6SN7s mounted horizontally helping to keep the chassis less than 3″ high. Heat? Good question. The entire machined aluminum chassis functions as a giant heat sink or as the VinnieRossi website adds, “Beyond its clean, seamless appearance, this substantial construction provides excellent shielding, resonance control, and thermal management.” As you can see in the fine print, the CANTA Integrated’s custom switch-mode power supply uses Belleson super-regulated outputs “In the linestage sections, patented Belleson® linear super-regulators provide an exceptionally low noise floor, while the power amplifiers feature dedicated 1200W peak supplies for effortless headroom and control.”

More from VinnieRossi on power:

CANTA’s power supplies are custom-designed from the ground up, exclusively for high-end audio. Every model features a precision-engineered switch-mode power supply (SMPS) with active power factor correction (PFC). By drawing power cleanly from the wall, PFC ensures the supply itself never introduces noise or interferes with other components. The result is rock-solid voltage, ultra-low noise, and lightning-fast response.

The included remote is also a lovely chunk of aluminum with just the right number of buttons according to my preferences and the entire package exudes seamless luxury. The front panel knobs and remote provide multi-functions—power, input selection, and volume as well as access to additional features including Home Theater Bypass, balance, gain settings (Low = 22dB, Med = 28dB, High = 34dB), and display brightness.

Confession: I’ve had the CANTA Integrated powering the Ø Audio Ymir (more info) since Monday and only took it out to get these (rushed) photos. Excuse me while I get back to listening…


VinnieRossi CANTA Integrated Amplifier
Price: $23,995
Company Website: VinnieRossi
US Distributor Website: Monarch Systems Distribution

Specifications

AC Mains: 100–264V AC, 50–60Hz
Output Power into 8Ω: 125W RMS per channel
Output Power into 4Ω: 250W RMS per channel
THD+N: <0.1%, 20Hz–20kHz
Frequency Response: 5Hz–100kHz, ±0.5dB
Signal-to-Noise Ratio: >100dB, 20Hz–20kHz
Input Impedance: 47kΩ
Gain: Adjustable: LOW = 22dB, MED = 28dB, HIGH = 34dB
Line Output Impedance: <100Ω
Speaker Output Impedance: <0.05Ω
AC Mains Fuse: 8A, 250V, 5 x 20mm, fast-blow ceramic
Product Weight: 24 lb (11kg)
Product Dimensions (including knobs, jacks, and feet): 16.25 x 12.75 x 2.75 in (413 x 324 x 70mm)
Remote Dimensions: 3.94 x 1.97 x 0.55 in (100 x 50 x 15mm)

VinnieRossi® reserves the right to change product features and/or specifications without notice to improve reliability, function, design, or otherwise.