
Linear Tube Audio Z10 Integrated Amplifier ($4900.00 + $500 for optional MM/MC Phono Preamp).
A single component solution, the Z10 Integrated amplifier incorporates the acclaimed ZOTL10 power amplifier, a Berning designed preamplifier, LTA’s digital control system, and an optional phono preamp – all beautifully packaged in a Fern & Roby designed case.

Specifications
Inputs: 4 single-ended Cardas RCA stereo, 1 true balanced stereo input using two 3-pin XLRs
Speaker Output: 4 WBT copper speaker binding posts, banana or spade
Headphone Output: Low: Approx. 1 watt per channel at 8 ohms, High: Approx. 3 watts per channel at 8 ohms
Tape Monitor: 1 stereo tape monitor out, 1 stereo tape monitor in – both Cardas RCA
Front Panel Controls: 7 brass touch switches (power, input, tape monitor, up, down, menu/select, back), volume control, and headphone speaker switch
Remote Control: All front panel functions using paired Apple TV Remote (power on programmable)
Volume Control: 100 stepped attenuator (smallest step 1/1000th of total value) using Vishay Dale 1% precision resistors
Output impedance: 1.2 ohms
Input impedance: 47k
115VAC or 220VAC configured at factory – 50/60Hz – IEC receptacle
Hum and noise: 94dB below full output (measured at 20Hz-20kHz) • Carrier: -50dB (460kHz)
Power output with 4-ohm load: 12W, 0.5% THD
Power output with 8-ohm load: 10W, 0.5% THD
Frequency response (8-ohm load): 6Hz to 60kHz, +0, -.5dB
Amplifier class: Push-pull Class AB
Voltage gain (8-ohm load): 18dB
Size: 16 inches wide, 5 1/8 inches tall, 16 inches deep (including connectors)
Net weight: Amplifier: 18 lbs./8.2 kg
Finish: Aluminum case
Tube complement: premium NOS two 12AT7s, four 12AU7s, and four EL-84s or equivalents
Home Theater Function can select any input for fixed volume
Display: 16 Levels of brightness and programmable 7-second time out
Optional Phono Preamp: 54 dB gain for moving magnet cartridges. Moving coil cartridges supported with configurable daughter card.