Nashville, TN-based dealer Gesalt Audio offered another room filled with rather unusual musical wonders.
Let’s begin with the Camerton Binom-1.2 speakers, a rear-ported single driver design employing the company’s own flagship Binom-A2 driver housed in a lacquered wood cabinet.

If you look close, you’ll see that the diaphragm is also made of wood. From Camerton:
Binom-A2 is the absolute flagship of the Binom-A model range. In this driver, almost all elements are designed so that they work at the limit of their physical capabilities. The absolute physical limits of the parameters in the materials used have been reached. The aluminum stiffeners of the new compact wooden diaphragm have been replaced with anisotropic carbon fiber impregnated with a special high-damping compound. The mechanical properties of this material are tens of times higher than those of aluminum alloys used in the aerospace industry. The weight of the new diaphragm has been reduced to an incredible 2.6g. This allowed a more flexible approach to optimizing the operation of the diaphragm, and a special impregnation completely dampens all unwanted resonances.
The Binom drivers come in three versions that also include the Binom-A and Binom-A1. According to the company, frequency response for the Binom-1.2 speakers is 35-28,000Hz with an 88dB Sensitivity (2.83V/1m) and an 8 Ohm nominal impedance. The cabinets come finished in black or white piano lacquer. Camerton Audio was founded in 1999 in Ukraine and “then reborn in 2019 in Germany.”

Electronics were from Essex, England-based SW1X Audio Design, which is where all their products are designed and hand assembled. The Pure Class A, Interstage Transformer coupled, Zero Negative Feedback, Directly Heated Triode, Fully Valve Rectified, Push Pull, 3 Gain Stage SW1X MPA V PP Special mono amplifiers provided the power with a pair of Linlai Sapphire 300Bs per side for 22 Watts of sweet power.

The Cinnamon Galle NT, a lovely chunk of sand cast aluminum and bronze with industrial design by the architects and designers of IM Collective, can act as a Roon Core, which is how it was used here, as well as a network transport.

SW1X’s VDT IV Special Valve Digital Transport Player & Music Streamer supports UPnP/DLNA, Spotify Connect, Tidal Connect, Qobuz Connect, and Roon (endpoint). Those tubes are used by the VDT IV’s master clock, S/PDIF output stage, and the tube rectified output power supply. Outputs include that tube powered S/PDIF, AES/EBU, and USB with HDMI and I2S offered as options.

The SW1X DAC IV Special relies on the Philips TDA1541 DAC chip to convert D to A and adds a 6V6-based tube output stage to the digital mix.

Last but not least is the SW1X PRE III Classic Preamplifier a pure class A, zero negative feedback (global or local) line pre-amplifier with a signal output transformer (OPT) de-coupled valve output stage. In an interesting twist for a preamp, the PRE III uses a pair of triode connected EL84s in its output stage driven by a 6N6P or 5687/E182CC.

All together this system offered stunning delicacy, a lightness of touch, purity, and body that made music feel…present.
The System:
Camerton Binom-1.2 Loudspeakers: $19,995/pair
SW1X MPA V PP Special Mono Amplifiers: $37,836/pair
SW1X PRE III CLassic Preamplifier: $27,995
SW1X DAC IV Special: $29,995
SW1X VDT IV Special: $29,995
Cinnamon Galle NT: $13,995
beaudioful LÜTT Equipment Rack: $5995
Cables from Tchernov