CAF 2026 Favorite Rooms: Robyatt Audio

Some people say “Quad 57” with the same reverential awe as others might sound saying “Rosebud”.

We all know that the “57” after “ESL” (Electrostatic Loudspeaker) represents the year the ESL-57 was released as a mono speaker into the wilds by QUAD, an acronym for Quality Unit Amplifier Domestic, which cemented company founder and designer Peter J. Walker’s name in the most hallowed halls of hifi history. The Quad ESL-57 remained in production for 28 years selling some 54,000 units according to many a Quad aficionado including Art Dudley (see Art’s “Listening #42” in Stereophile for a great intro).  “Walker’s Wonder” indeed.

It’s fair to say that Robin Wyatt of Robyatt Audio is a Quad aficionado of the first order and I first heard a pair of his Quad ESL-57s back in 2006 during a visit to his home which I wrote about for 6moons. Here’s a fun story from that visit:

In the mid 1980s, Robin and his dad drove to the original Quad factory to drop his Quad 405 amplifier off for repair. For the 2nd time. When Peter Walker heard that Robin’s amp was back again, he took Robin and his ailing amp up onto the roof of the Quad building where he proceeded to toss Robin’s amp off the roof. For Peter Walker, the balance between art, science and reliability left little room for failure and nothing that a little gravity couldn’t fix. Robin left Peter Walker and the Quad factory with a brand new amp and a great story.

For CAF 2026, Robin has gone and done it, it being the release of the ES57 RA Ultimate Loudspeaker which is a robustly rebuilt Quad 57 from the ground on up. I didn’t take notes, do people do that any more?, so I asked Robin to provide some details:

The Quad ES 57 RA is a collaboration between Electrostatic Solutions LLC & Robyatt Audio LLC.

This newly built loudspeaker from the USA begins with a donor pair of original Quad 57 loudspeakers.

The panels are completely taken apart, meticulously cleaned, and then reassembled using two micron film. This work is done by hand as required in the original design white paper. The original panels used six micron film in the tweeter, and 16 micron film in the mid base panels. The use of the lighter film increases the speaker’s efficiency by 3 dB, thus allowing far more headroom and SPLs to be achieved.

Next, the electronics required for the speaker are replaced with new components of the exact same specs as the original. However, today’s newer tolerance resistors and capacitors allow for an increase in performance. Protection boards are added out of the audio path that stop damage to the panels from any amplifier. A new set of pure copper Cardas binding posts and a modern IEC power socket are installed.

Then a new frame is constructed of 2-inch-thick solid maple that is biscuited and vacuum-glued in the tradition of fine furniture. No screws. In fact, this work is done by a master furniture maker from New Jersey who regularly produces $20,000 coffee tables and such.

Finally, a grill is placed over the speaker to protect the speaker and the owner; Gaia III footers or brass spikes are added to the front two legs depending on the new owner’s requirements. The rear leg has an adjustable bolt to allow tilt as required by the new owner’s seat distance and height.

All this work takes a standard Quad 57 weight of 38 pounds to the new weight of the ES 57 RA to 75 pounds. A side-by-side comparison of a restored regular 57 and this new 57 is an increase in bass slam, bass extension, overall definition, increased detail, better transparency, more air, and better precision. They are not the same speaker sonically.

I don’t know the exact count of how many amplifiers Robin had used with his Quads over the years but my best guess is more than almost anyone on the planet. Here he had the diminutive and Quad-ish looking CS620 Stereo Power Amplifier / CS710 Preamplifier from Crimson Electronics in play. The CS620 operates in Class B offering 50 watts/channel @ 8Ω, 75 watts/channel @ 4Ω. Apologies for the blur, I’ll call it bokeh (wink), but that blurred stack in back are the budget-friendly Volumio Streamer and DAC.

To top off this small rig we have the  direct drive VPI “In the Can” turntable with a 16″ Bokrand Sonoro tonearm tipped with the TZAR Twin Si cartridge.

One knock on original Quad 57s is their supposed inability to rock or rap or dubstep or EDM and as legend would have it they’re much better for gentler music listened to through a cloud of pipe smoke. Robin has been evangelical, on a mission, to dispel that notion and this system acted as proof of that concept by offering great big bold full range dynamic as all get-out sound when the music called for it while retaining all those magical things Quad 57s are rightfully praised for. Things like delicacy, nuance, and among the best disappearing acts in all of hifi.

The System:

ES57 RA Ultimate Loudspeaker: $18,500
Crimson CS620 Stereo Power Amplifier: 10,750
Crimson CS710 Preamplifier: $21,500
Volumio Presciso DAC: $1000
Volumio Rivo+ Streamer: $1600
TZAR Twin Si Phono Cardtridge: $6875
Bokrand Sonoro 16″ Tonearm: $3575
VPI “In the Can” Turntable: $15,500
Analog Restorations Turntable Mat: $38.50